To set the clock, press CLOCK. Use the DAY, HOUR and MINUTE buttons individually to set the correct time. Press OK, Roomba will beep to indicate the time and date has been set. You can schedule Roomba to clean once per day, up to seven times per week. Use the following procedure to set a schedule: You must set the clock before scheduling Roomba to clean. Use the DAY, HOUR and MINUTE buttons individually to set the schedule. Press OK, Roomba will beep to indicate the schedule has been set. To view the scheduled cleaning times: Press DAY to cycle through the scheduled cleaning times. To delete a scheduled cleaning time: When Roomba displays the scheduled cleaning time you’d like to delete, press and hold DAY for five seconds. Roomba will beep to indicate the cleaning time has been deleted. To change the cleaning schedule: When Roomba displays the scheduled cleaning time you’d like to change, press the HOUR and MINUTE buttons to make the change.

The clock can be viewed in either the 12-hour (AM/PM) format or the 24-hour format. To toggle between the two views, press and hold CLOCK for 5 seconds. miele s246i canister vacuum cleanerToggle between 12-hour and 24-hour format using the CLOCK button. vh781 vacuum cleanerPress OK to save. zepter tuttojebbo vacuum cleanerRoomba beeps and the clock briefly illuminates to indicate the clock format has been switched. The clock will switch back to the default 12-hour (AM/PM) format when the battery is disconnected or very low on power. Roomba 500 and 600 Scheduling Roomba 500, 600, 700, 800 runs at the wrong time. How does a Virtual Wall® Lighthouse™ work? Roomba 400, 500, 600, 700, 800 Cleaning Modes

Before using Roomba for the first time, you must remove the battery pull tab and charge Roomba overnight. If you have a Lithium Ion (Li-Ion) battery, place Roomba on the Home Base® to wake up the robot, and then use right away. Roomba should charge in the following manner: If using a charger, it should have a solid green power indicator when it is plugged into a wall outlet. If you are using a Home Base®, the power indicator should blink approximately once every 4 seconds when plugged into the charger or outlet. For some Home Bases, the light will go out after 4 seconds. On some robots, the CLEAN light should pulse red/amber while charging. Other robots will turn off all indicators after 1 minute of charging and will continue to charge. Some Home Bases will have a solid green power indicator while charging, and others will turn off after 4 seconds. Charging time under normal conditions is 3 hours. If Roomba senses that its battery has been discharged, it will enter a special refresh charge cycle.

When the refresh charge is initiated, the CLEAN indicator will quickly pulse red/amber. Do not interrupt the cycle once it has begun. The refresh charge cycle is initiated by the robot and cannot be started manually. Some robots will turn off all indicators after 1 minute of charging in refresh mode and will continue to charge. Not applicable to the Li-Ion battery. When the charging cycle is complete, the CLEAN light on Roomba should illuminate solid green, or will illuminate solid green after pressing the CLEAN button. Age of the battery, room temperature, floor type, and frequency of use will reduce battery capacity over time. While Roomba is running, the CLEAN indicator will display the state of the battery as follows: Always store Roomba charging on the Home Base or with the charger plugged into the robot. For long-term storage, remove the battery from Roomba and store in a cool, dry place. If you are experiencing short runtime, please view the battery maintenance tips.